송풍기

HOME > 송풍기

GLEC-6 Kitchen Exhaust Fan

본문

GLEC-6 kitchen exhaust fan is designed to be used for the extraction of exhaust air and other non-aggressive gases where low energy consumption, low noise and demand controlled ventilation are required. Typically used for commercial kitchen exhaust due to motor out of airstream and ease of cleaning.

GLEC-6 kitchen exhaust fan is designed to be used for the extraction of exhaust air and other non-aggressive gases where low energy consumption, low noise and demand controlled ventilation are required. It is typically used for commercial kitchen exhaust due to motor out of airstream and ease of cleaning. The fan can be installed inside or outside of the building. If installed outside a rain cover must be used and the fan must be sealed, see the installation manual.

The EC motor for GLEC-6 is a permanent magnet motor of class IE4 with motor speed control. The impeller is optimized for high efficiency and low noise. The casing hatches can be easily opened, which enables easy access to clean the impeller and inside of the casing.

The fan is as standard a vertically split version, which helps in transporting it to site. The use of a flexible connection on both inlet and outlet side is recommended. Standing skids can be removed and installed to another position if an alternative discharge position is required.

When used as a smoke extract fan, the fan can handle 300°C for 60 minutes.

  • EC motor of class IE4 with permanent magnets with speed controller
  • Low sound level
  • Easy installation and maintenance
  • Suitable also for +300°C for 60 minutes
  • 3 fan sizes
  • Volume flow rate up to 2,6 m³/s (9360 m³/h)
  • Max pressure rise 1000 Pa
  • Casing insulated for sound and condensation with 50 mm mineral wool
  • Max. exhaust air +80°C in continuous use, max. ambient temperature + 40°C
  • Fire resistance class: F300(60) tested according to EN 12101-3 by Fläkt Woods
  • EC motor with permanent magnets with speed controller
  • Electrical supply: Sizes 031 and 040: 1~230 VAC 50 Hz
    Size 050: 3~400 VAC 50 Hz
  • Speed controller: Using 0-10 V control signal
  • Easy installation and maintenance
  • If installed outside a rain cover has to be used and the fan has to bee sealed
  • Casing made of galvanized sheet steel metal or aluminium and zinc coated sheet metal